全国服务热线: 15112626861

mobil Unirex S2 Grease

发布日期 :2017-07-06 09:29访问:1次发布IP:183.37.247.36编号:4443733
品牌:
美孚
分 类
工业用润滑油
单 价
88.00元/桶
最小起订量
1 桶
供货总量
100 桶
发货期限
自买家付款之日起 1 天内发货
有效期至
长期有效
咨询电话
0755-28172878
手机
15112626861
Email
15112626861@139.com
在线咨询
点击这里给我发消息
让卖家联系我
详细介绍
 

Features and Potential Benefits

Unirex S 2 grease is specially developed for high temperature applications where mineral oil based greases may not provide adequate protection. The ester base fluid has a low volatility at the working temperatures involved, this can lead to long grease life when compared to a conventional mineral oil product. Unirex S 2 is suitable for high temperature operations where frequent relubrication is not practical.

This product offers the following performance features:

Outstanding high-temperature performance with better lubricity and wear protection than conventional grease
Low base stock volatility helping to provide long lubricant life and potentially extend re-lubrication intervals.
An upper operating temperature of 200º C /392°F based upon ASTM D3336 High Temperature Life performance

 

Applications

Application notes: The ester base oil of Unirex S 2 is not compatible with many common elastomer seal materials. For example, it may cause a softening or swelling of NBR seals. It is recommended that the equipment manufacturer or your ExxonMobil representative be consulted regarding seal compatibility in a specific application.

Unirex S 2 is recommended by ExxonMobil for severe applications including:

Conveyor bearings in kilns and ovens Steel mill ladle bearings Jet aircraft starter clutch assemblies Critical oven bearings in Fiberglas manufacture

 

Typical Properties

 

Property Unirex S 2
NLGI Grade 2
Thickener Type Li-complex
Color, visual Orange/Brown
Worked Penetration,, ASTM D 217, mm/10 280
Dropping Point ASTM D 2265, ºC 280
4-Ball Wear, scar diameter, ASTM D 2266, mm 0.60
Viscosity of base Oil at 40 ºC, ASTM D 445, cSt 170
Oil Separation, ASTM D 1742, mass % 3
Lubrication life at 204 ºC, ASTM D 3336, hours 500
Corrosion Prevention, ASTM D 1743, Rating Pass
4-Ball Weld Load, ASTM D 2596, Kg 160

 

 

Health and Safety

based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.


相关产品
主营产品:美孚润滑脂
 
相关分类
推荐产品
信息搜索
 
深圳市千百顺润滑油有限公司
  • 地址:深圳市福田区金地一路金地工业区18栋1-2层
  • 电话:0755-28172878
  • 邮件:15112626861@139.com
  • 手机:15112626861
  • 传真:0755-28172078
  • 联系人:张 宏明